Corrosion Science and Technology

Issue

Home > All Issues

ISSN(Print): 1598-6462
ISSN(Online): 2288-6524
Issue: Bimonthly (2,4,6,8,10,12)
Type: Journal
Language: English/Korean
History: v1 n1 Feb. 2002

Index:	ESCI (since 2017)
	KCI (since 2019)
	Scopus (since 2019)

Date: June 30, 2008
Vol: 7, Issue: 3

This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

List

Microstructural Investigations of Scale Formed on FeCrAl Steel during High Temperature Oxidation in

M. Homa, Z. Zurek, B. Morgiel, P. Zieba, J. Wojewoda

Keywords: SEM, TEM, XRD, , Fe-Cr-Al alloy

Corros. Sci. Tech. , 2008, 7(3) pp. 139-144

Abstract

Full-Text

Full-Text Download (1.1 MB)

Investigation on Mechanical Property and Adhesion of Oxide Films Formed on Ni and Ni-Co Alloy in Room and High Temperature Environments

Yoshinori I. Oka, Hisanobu Watanabe

Keywords: high temperature oxidation, oxide film, Ni, Ni-Co alloy, mechanical properties, adhesion, hardness, particle impact method

Corros. Sci. Tech. , 2008, 7(3) pp. 145-151

Abstract

Full-Text

Full-Text Download (577.1 KB)

Corrosion Mechanisms of New Wrought Mg-Zn Based Alloys Alloying with Si, Ca and Ag

G. Ben-Hamu, D. Eliezer, K.S. Shin, L. Wagner

Keywords: Mg-Zn alloys, corrosion behaviour, hot extrusion method, electrochemical techniques

Corros. Sci. Tech. , 2008, 7(3) pp. 152-157

Abstract

Full-Text

Full-Text Download (849.6 KB)

Improving of Corrosion Resistance of Aluminum Alloys by Removing Intermetallic Compound

Osami Seri

Keywords: aluminum, iron, electrochemical treatment, intermetallic compound, selective dissolution

Corros. Sci. Tech. , 2008, 7(3) pp. 158-161

Abstract

Full-Text

Full-Text Download (432.4 KB)

Useful Corrosion - Potential of Magnesium Alloys as Implants

A.Arslan Kaya, R.Alper Kaya, Frank Witte, Ozgur Duygulu

Keywords: magnesium, AZ31, biomaterial, bone implants

Corros. Sci. Tech. , 2008, 7(3) pp. 162-167

Abstract

Full-Text

Full-Text Download (631.1 KB)

Electrochemical Random Signal Analysis during Localized Corrosion of Anodized 1100 Aluminum Alloy in Chloride Environments

M. Sakairi, Y. Shimoyama, D. Nagasawa

Keywords: galvanic corrosion, aluminum, anodizing, electrochemical noise, chloride ions

Corros. Sci. Tech. , 2008, 7(3) pp. 168-172

Abstract

Full-Text

Full-Text Download (546.1 KB)

Application of the Electrochemical Noise Method with Three Electrodes to Monitor Corrosion and Environmental Cracking in Chemical Plants

Takao Ohtsu, Masazumi Miyazawa, Ryuicluro Ebara

Keywords: electrochemical noise method, general corrosion, stress corrosion cracking, corrosion fatigue, corrosion monitoring

Corros. Sci. Tech. , 2008, 7(3) pp. 173-178

Abstract

Full-Text

Full-Text Download (552.6 KB)

Study of the Application of Gel Electrolyte in the Reference Electrode of

Cunguo Lin, Likun Xu, Yang Liu

Keywords: gel electrolyte, reference electrode, , service life

Corros. Sci. Tech. , 2008, 7(3) pp. 179-181

Abstract

Full-Text

Full-Text Download (178.4 KB)

EBSD Microstructural Characterisation of Oxide Scale on Low Carbon Steel

S. Birosca, Cooman B.C. De

Keywords: oxidation, steel, EBSD, microstructure

Corros. Sci. Tech. , 2008, 7(3) pp. 182-186

Abstract

Full-Text

Full-Text Download (928.7 KB)

SCC Mechanism of Ni Base Alloys in Lead Contaminated Water

Seong Sik Hwang, Dong Jin Kim, Yun Soo Lim, Joung Soo Kim, Jangyul Park, Hong Pyo Kim

Keywords: Ni base alloys, alloy 600, alloy 690, Lead, Stress corrosion cracking, SCC mode

Corros. Sci. Tech. , 2008, 7(3) pp. 187-191

Abstract

Full-Text

Full-Text Download (453.1 KB)

List

Room 603, The Korea Science Technology Center The first building, 22, Teheran-ro 7-gil, Gangnam-Gu, Seoul, 06130, Korea
Tel: +82-2-539-5869 | Fax: +82-2-555-4579 | Email: cst@j-cst.org